Basal metabolic rate is the energy your body uses doing nothing at all: breathing, circulating blood, repairing cells, holding temperature, running your brain. It is the biggest single slice of most people's daily calorie use, and it is the number every diet plan quietly assumes.
This calculator shows three standard estimates at once instead of one. They never agree exactly, and the gap between them is the most useful thing on the page: it tells you how much precision the maths actually has for a body like yours.
What BMR means, and what it doesn't
Strictly, BMR is measured in a lab: after an overnight fast, at complete physical rest, in a room warm enough that you are not burning fuel to stay warm. Under those conditions the body is doing only maintenance work.
The equations here estimate that maintenance figure from four inputs. None of them measures you. They are population averages pointed at one person, which is why three of them can disagree by 100 kcal or more on the same measurements.
BMR is also not the same as RMR. Resting metabolic rate is measured under looser conditions — no fast, no lab, no overnight stay — and usually lands slightly higher, often within about 10% of BMR. In everyday use the two terms get mixed up, but only one of them is what these formulas predict.
How to use this calculator
- Choose Metric or Imperial.
- Enter your weight, height and age. Imperial takes feet and inches separately.
- Leave the formula on Mifflin-St Jeor unless you have a reason to change it.
- Read the main figure, then look at the comparison bars underneath to see how far the other two formulas land from it.
- Use Copy link if you want to reopen or share the same calculation. Your inputs are stored in the address bar, not on a server.
Sex at birth is an input because all three equations were built with a binary term that adjusts for average differences in body composition. It is a formula switch, not a statement about identity, and picking the one that matches your physiology gives the closer estimate.
The three formulas
Each was fitted to a different group of people at a different time, so each carries a different bias.
| Formula | Inputs | Best for |
|---|---|---|
| Mifflin-St Jeor | Weight, height, age, sex | Most adults — the default for good reason |
| Harris-Benedict (revised) | Weight, height, age, sex | Comparing against older diet plans and clinical notes |
| Katch-McArdle | Weight, body fat % | Lean, muscular or athletic people with a body-fat figure they trust |
Mifflin-St Jeor (1990) was derived from 498 healthy adults, normal-weight and obese, measured by indirect calorimetry. It explains about 71% of the variation in resting energy use across that group, which is strong for four inputs. It is the usual default in clinical nutrition.
Harris-Benedict dates from 1919 and was the standard for seventy years. The version used here is the 1984 revision by Roza and Shizgal, who put its precision at roughly 14% for a normal subject. It tends to read a little higher than Mifflin for many people.
Katch-McArdle works from lean body mass rather than height and age: 370 + 21.6 × kilograms of lean mass. That is the right model for a muscular person whose weight overstates their resting needs — but it is only as good as the body-fat percentage you feed it. A guess makes the result a guess.
Harris-Benedict (revised): 88.362 + 13.397 × kg + 4.799 × cm − 5.677 × age (male)
Harris-Benedict (revised): 447.593 + 9.247 × kg + 3.098 × cm − 4.330 × age (female)
Katch-McArdle: 370 + 21.6 × lean mass (kg), where lean mass = kg × (1 − body fat % ÷ 100)
A worked example
Mifflin: 10 × 70 + 6.25 × 175 − 5 × 30 + 5 = 700 + 1,093.75 − 150 + 5 = 1,649 kcal/day
Harris-Benedict: 88.362 + 937.79 + 839.83 − 170.31 = 1,696 kcal/day
Katch-McArdle: 56.0 kg lean mass → 370 + 21.6 × 56 = 1,580 kcal/day
The spread is 116 kcal a day — the lowest estimate sits about 7% under the highest — a useful reminder that "your BMR" is a range, not a reading. The same man at a sedentary activity factor of 1.2 needs roughly 1,979 kcal a day in total; at 1.55, about 2,556. Those are total daily energy figures, not BMR.
What moves the number
Lean mass is the biggest lever. Muscle and organs burn energy at rest; fat tissue burns very little by comparison. Two people can weigh the same and differ by several hundred calories a day purely on body composition.
Age lowers BMR slowly, mostly because lean mass tends to fall with it. Body size matters because a larger body has more tissue to maintain. Sex matters on average for the same reason, which is exactly what the binary term in the equations is compensating for.
Because the physical activity level (PAL) used to get from BMR to daily needs is total energy divided by BMR, the BMR share is simply 1 ÷ PAL: about 62% at a PAL of 1.6, the modal value for sedentary adults in the FAO's review of the evidence; about 54% at 1.85, the midpoint of a moderately active lifestyle; about 45% at 2.2.
Things the formulas cannot see: thyroid conditions, some medications, fever and infection, pregnancy and breastfeeding, long periods of restrictive dieting, and very high muscle mass. Each of those can move real resting energy use well beyond the formula's error bar.
BMR, RMR and TDEE: what's the difference?
| Measure | What it covers | How you get it |
|---|---|---|
| BMR | Maintenance only — strict rest, fasted, thermoneutral | Lab measurement, or the equations here |
| RMR | Maintenance plus light everyday activity; usually within about 10% of BMR | Looser lab protocol, or a resting estimate |
| TDEE | Everything: BMR, digestion, walking, training | BMR × an activity factor of roughly 1.2–1.9 |
BMR is a floor, not a calorie target
The most common mistake with this number is eating it. BMR leaves out digestion, standing, walking, fidgeting and training — easily several hundred calories a day. Eating at BMR is a crash diet with a scientific-sounding label.
If you are setting intake, start from total daily energy expenditure instead: TDEE calculator, or calorie calculator for a goal-based figure. Body-fat percentage, if you want the Katch-McArdle estimate to mean anything, comes from the body fat calculator.
Where the estimate goes wrong
Treat a formula result as accurate to roughly ±10%, and less than that at the edges of the population it was built from.
- Pregnancy and breastfeeding raise energy needs; these equations do not model them.
- Children and adolescents need age-specific equations — the ones here are adult equations.
- Long-term dieting and very low body weight can push measured BMR below the formula.
- Thyroid conditions, fever, illness and some medications change resting energy use.
- Very muscular people are usually under-estimated by Mifflin and better served by Katch-McArdle.
- Severe obesity, amputation and some disabilities break the height-and-weight assumptions entirely.
If the number matters clinically, the test is indirect calorimetry: you breathe into a mask and the machine measures oxygen use directly. Everything else, including this page, is an estimate.