ToolsHub4u

Compare two texts and measure how alike they are

Paste two passages and see how much they overlap: a score built from character sequences, a second from shared words, and the words the two have in common.

  • Two scores, not one
  • Shared words listed
  • Nothing uploaded
Ready Text & Writing
A similarity score is evidence, not a verdictCommon phrases, templates and quotations raise the score. Read the shared words before drawing a conclusion.
1Enter
2Adjust
3Copy result

Text Similarity Checker

1

The two texts

Both passages stay in the browser.

Ignore
No text yet Live
2

Similarity

Similarity

66%

Some overlap

  • theused 3 times in both

    A 3 / B 3

  • fromused 2 times in both

    A 2 / B 2

  • anused 1 time in both

    A 1 / B 1

  • cityused 1 time in both

    A 1 / B 1

  • hourused 1 time in both

    A 1 / B 1

  • laterused 1 time in both

    A 1 / B 2

  • libraryused 1 time in both

    A 1 / B 1

  • mondayused 1 time in both

    A 1 / B 1

  • outsideused 1 time in both

    A 1 / B 1

  • staffused 1 time in both

    A 1 / B 1

Two ways of measuring overlap

Character sequences66%
Word sets42%
Word overlap
42%
Shared words
11
Shared sequences
73
A words
22
B words
22
Length difference
9 chars

The headline score compares overlapping three-character sequences. The word figure compares unique words. They disagree when texts share vocabulary but build sentences differently.

This is not a plagiarism check. It cannot search the web, does not know the source of either passage and cannot judge whether the similarity is legitimate quotation, shared terminology or copying.

Paste two passages and the tool scores how alike they are, from 0 to 100%, then shows which words the two share. It is a quick way to see whether a rewrite kept the original's wording, whether two articles cover the same ground, or whether a submitted text is close to something you already published.

The headline figure compares overlapping three-character sequences. Underneath it, a second figure compares unique words. The two disagree often, and understanding why is most of the work of using this tool well.

Two scores, two measures

The headline similarity is a Dice coefficient over character trigrams. Each passage is cut into every three-character run it contains, the two sets are compared, and the score is twice the number of shared runs divided by the total number of runs in both. That is why the result is sensitive to spelling and word order: changing a letter changes three or four trigrams at once.

Word overlap is a Jaccard index over unique words. It ignores order and repetition, so two passages built from the same vocabulary but arranged into different sentences can score high on words and lower on sequences.

Worked exampleA: The quick brown fox jumps over the lazy dog.
B: The quick brown fox leaps over the lazy dog.
Similarity: 88%   Word overlap: 78%
Shared words: 7   Shared sequences: 36

One word changed out of nine drops the sequence score by 12 points. The word score falls further, because "jumps" and "leaps" are both removed from the shared set and the union grows.

The four rules, and what they hide

Each rule, what it changes and which score it affects
RuleEffectAffects
Ignore caseLowercases both passages firstBoth scores
Ignore punctuationReplaces every non-letter, non-digit with a spaceBoth scores
Ignore extra spacesCollapses runs of whitespace and trims the endsBoth scores
Ignore common wordsRemoves a list of 96 function words before comparing vocabularyWord overlap only

The first three rules change the text before either score is calculated, so they raise both figures together. The fourth is different: it only filters the word list, so the headline similarity does not move at all. It is useful when two passages share nothing but "the", "of" and "and", which is the usual reason word overlap looks higher than it should.

This is where a 100% result needs reading carefully:

Worked exampleA: Hello world
B: hello, world!
No rules: 50% similarity
Case, punctuation and spaces ignored: 100%

Nothing was edited between those two versions except capitalisation and a comma. The 50% is the honest character-level answer; the 100% is the answer to a different question — "are these the same words once I stop caring about formatting?" Both are correct, and the rules you leave on decide which one you get.

Reading the label

The status line names a band rather than leaving you with a bare number:

  • 95% and above — Nearly identical. Expect a copy, a formatting variant or a trivially edited version.
  • 70 to 94% — Very similar. The status turns amber. At this level the two texts are usually the same passage with substitutions.
  • 40 to 69% — Some overlap. Shared subject or shared phrasing, but a genuinely different text.
  • 15 to 39% — Mostly different. A few phrases in common, probably topic vocabulary.
  • Below 15% — Little in common. Two unrelated passages, or two texts on the same subject written from scratch.

These bands are conventions chosen for this tool, not industry standards. Treat the amber warning at 70% as a prompt to look at the shared-word list rather than as a verdict.

The shared-word list

Up to ten words appear with a count, showing how many times the word occurs in both passages and the two totals side by side — "A 2 / B 2". Words are ordered by how often they appear in both, then alphabetically. That list is often more informative than the score: a run of content words in common means real overlap, while a run of "the" and "of" means nothing at all.

The count shown is the smaller of the two frequencies. If version A uses "library" four times and version B once, the list says "used 1 time in both". That is deliberate — it describes the shared ground rather than the total usage.

This is not a plagiarism check

The tool compares two texts you supply. It cannot search the web, does not know where either passage came from, and cannot tell whether a match is copying, a quotation, a shared definition or two people describing the same process in the same words. Its own warning says as much.

That limits what a high score means. Two safety manuals will score highly on procedure language without either author having seen the other. Two news reports of the same press release will share sentences because they share a source. And a genuine copy with every word swapped for a synonym can score low while being an obvious derivative to a human reader.

Use it as a first pass on a specific pair of texts — a submitted article against your published one, a rewrite against its original, two drafts of the same section — and then read both passages yourself. For a web-wide check, you need a search-based service, not a comparison tool.

Limits

  • No word-level highlighting. You get scores and a word list, not a marked-up diff. For that, use the text comparison tool.
  • Order matters to the headline score. Two passages using identical sentences in a different order will score lower on sequences than on words.
  • Short texts are noisy. A five-word phrase has very few trigrams, so a single changed word can swing the score by 30 points or more.
  • Accents and scripts are fine. Letters and digits from any script are kept; everything else is treated as a separator when punctuation is ignored.
  • Nothing is uploaded. Both passages are compared in the tab and a reload clears them.

Run the comparison twice: once with every rule on, once with them all off. The gap between the two scores tells you how much of the similarity is formatting and how much is wording.

Questions

Common questions

Short answers to what people ask before using this tool.

How is the similarity percentage calculated?

It is a Dice coefficient over three-character sequences. Both passages are cut into every three-character run they contain, and the score is twice the number of shared runs divided by the total runs in both. That is why a single changed letter moves the figure.

What is the difference between the two scores?

The headline compares character sequences and is sensitive to word order and spelling. Word overlap compares unique words and ignores order. Texts that share vocabulary but build sentences differently score high on words and lower on sequences.

Why is one pair 50% and another 100% with the same words?

Because of the ignore rules. "Hello world" and "hello, world!" score 50% with no rules and 100% once case, punctuation and extra spaces are ignored. The rules change the text before either score is calculated.

Is this a plagiarism checker?

No. It only compares the two passages you paste. It cannot search the web, does not know where either text came from and cannot tell copying from quotation, shared terminology or a common source.

What does "ignore common words" actually do?

It removes 96 function words — "the", "of", "and", "is" and similar — from the word comparison only. The headline sequence score does not change. It stops two unrelated passages looking similar because they both use the same small words.

What do the labels mean?

95% and above is "Nearly identical", 70 to 94% "Very similar", 40 to 69% "Some overlap", 15 to 39% "Mostly different" and below 15% "Little in common". They are conventions chosen for this tool, not industry standards.

Why do short texts give unstable scores?

A short phrase contains very few trigrams, so one changed word removes a large share of them. A five-word comparison can swing 30 points on a single substitution. Use longer passages for a meaningful figure.

Is my text uploaded?

No. Both passages are compared in the browser tab and nothing is stored. Reloading the page clears the boxes.